Noise Abatement

New windows and doors aren’t just about aesthetics. Sometimes we’ll get a customer with a very specific need and we never shy away from a challenge! For example, this customer presented a unique problem: noise abatement.

The Problem

Rick and Kay built their house in Eastern Jefferson County in 1999. A few years ago, Interstate 265 expanded, and the noise from the new highway became impossible to ignore. All day long, but especially at night while they were trying to sleep, the sound of cars and trucks disturbed the family’s peaceful home. “I’m a light sleeper,” Rick said, “and I could hear every truck that went by in the house, all night long, every day. I said ‘we need to do something about this,’ and I contacted the Door Store. Kay and I met with them and I said ‘we need to have some sound deadening.’”

The Solutions: New Windows and Doors

We knew that updating the original vinyl windows to a Marvin wood-clad window would be a huge improvement, but simply switching the windows and doors wasn’t going to solve the problem completely.

Noise reduction glazing on glass windows and doors helps reduce sound drastically. We researched all the options of glazing profiles to find the right solution for the family. Together, Rick and the Door Store and Windows team determined which glass and glazing options were most cost-effective.

The result was really impressive.

A close-up of the new windows.

A close-up of the new windows show the quality.

“Whisper Quiet”

One of the project’s primary goals was improving the family’s sleep, so the team focused on the bedrooms. We installed the same windows and glazing along with an additional storm window. Marvin builds their storm window right in, appearing as part of the window as opposed to an a separate piece. This combination made the couple’s bedroom “whisper quiet,” which resulted in an increased STC (Sound Transmission Class) rating by about 7 points.

With the windows finalized, we tackled the kitchen door to the back patio. We installed a 20-gage steel door with triple-glazed glass and added foam insulation all around the frame, so that all the air pockets were filled.

New Marvin Windows

Glazing was added to the family’s windows.

The Result

The resulting noise abatement and the decreased energy bills impressed our customer. The new doors and windows brought down the family’s energy usage significantly, a great byproduct of fixing their initial problem.

Rick also commented on the service he received from our team. He appreciated that our installation team is made up of Door Store and Windows employees, and that they are not an outsourced vendor. Our team’s attention to detail and respect for the home was evident.

We’re pleased to be able to offer a noise abatement solution to our customer. We wish them many more happy, peaceful, and quiet years together. Are you curious about our window installation process? Learn more here. 

Intentionally Inconsistent: Mixed Hardware Finishes

A recent customer approached us about her St. Matthews home. The home was built in the early 1930s and her recent renovation aimed to modernize it, while keeping the original aesthetic in place. A challenge? Not really.

There is no rule that says all hardware within a home must match. In fact, adding different finishes around the house, when done thoughtfully, can really add a new layer of design and interest within a home.

For this client, she was intentional not only about design, but also about her specific needs as related to both window and door hardware throughout the interior and exterior of the home.

Brushed nickel hardware on the window matches the stainless steel appliances in the kitchen.

With stainless steel appliances in the kitchen, she felt brushed nickel hardware worked best and maintained consistency throughout the room. In other parts of the house, darker hardware was used due to touches of dark accents in each room.

Oil-rubbed bonze is considered a “living finish.”

On her beautifully adorned brand-new back patio, she brought in the darker hardware with an oil-rubbed bronze. Oil-rubbed bronze is what’s known as a “living finish” which means it is uncoated with a sealant and will naturally oxidize over time to show a unique patina on the finish. It will transform slightly over time through exposure to the environment and regular use. Some refer to a living finish as a way for hardware to age gracefully, adding personality and charm to the doorknob over the years. This works in this beautiful space.

Dark bronze is sealed and perfect for doors in high-traffic areas.

For a more utilitarian approach, she selected a dark bronze doorknob for what is probably the door with the heaviest usage. Her side door is where she most enters the house from the car as she comes and goes throughout each day. For this reason, the dark bronze is the right fit as it is sealed and no patina or aging is expected. The color on a dark bronze piece of hardware will remain constant for years to come.

Finally, the question became what to do with the hardware on her front door. Original to the home, this brass doorknob really seemed to work. Our salesperson guided the homeowner to keep what “wasn’t broken” and continue using this ornate door knob which really serves as a jewel to the home – and it works with the design and in conjunction with the rest of the house. A nod to the past, this doorknob reminds all who enter that although this home is updated and current, it has a history which should be respected and enjoyed throughout all of its future generations.

The original brass doorknob adds character and charm to the home.

If you are considering updating the hardware throughout your home, consider adding different finishes to meet your needs and work with your design. Our designers can help guide you to select the right choices that will bring you happiness every time you enter a room!